MC10EP90: Translator, Triple ECL Input to LVPECL / PECL Output
内容: The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL tr...
The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL translator. The device receives differential LVECL or ECL signals and translates them to differential LVPECL or PECL output signals. A VBB output is provided for interfacing with single ended LVECL or ECL signals at the input. If a single ended input is to be used the VBB output should be connected to the D input. The active signal would then drive the D input. When used the VBB output should be bypassed to ground by a 0.01 F capacitor. The VBB output is designed to act as the switching reference for the EP90 under single ended input switching conditions, as a result this pin can only source/sink up to 0.5mA of current.
To accomplish the level translation the EP90 requires three power rails. The VCC supply should be connected to the positive supply, and the VEE connected to the negative supply.
The 100 Series contains temperature compensation.
260 ps Typical Propagation Delay
Maximum Frequency > 3 GHz Typical
Voltage Supplies VCC = 3.0 V to 5.5 V, VEE = -3.0 V to -5.5 V, GND = 0 V
Open Input Default State
Safety Clamp on Inputs
Fully Differential Design
Q Output will default LOW with inputs open or at VEE
These are Pb-Free Devices
供給状況 & サンプル
Compliance: Pb-free Halide free
内容: Translator, Triple ECL Input to LVPECL / PECL Output
外形 タイプ: TSSOP-20
外形 Case Outline: 9.48
梱包形態 タイプ: TUBE
梱包形態 数量: 75
Market Leadtime (weeks):2 to 4
VCC Typ (V):
fMax Typ (MHz):
tpd Typ (ns):
tR & tF Max (ps):