MC10EP446: 3.3 V / 5.0 V ECL 8-Bit Differential Parallel to Serial Converter
内容: The MC10/100EP446 is an integrated 8-bit parallel ...
The MC10/100EP446 is an integrated 8-bit parallel to serial data converter. The device is designed with unique circuit topology to operate for NRZ data rates up to 3.2 Gb/s. The conversion sequence from parallel data into a serial data stream is from bit D0 to D7. The parallel input pins D0-D7 are configurable to be threshold controlled by CMOS, ECL, or TTL level signals. The serial data rate output can be selected at internal clock data rate or twice the internal data rate using the CKSEL pin.
Control pins are provided to reset (SYNC) and disable internal clock circuitry (CKEN). In either CKSEL modes, the internal flip-flops are triggered on the rising edge for CLK and the multiplexers are switched on the falling edge of CLK, therefore, all associated specification limits are referenced to the negative edge of the clock input. Additionally, VBB pin is provided for single-ended input condition.
The 100 Series devices contain temperature compensation network.
3.2 Gb/s Typical Data Rate Capability
Differential Clock and Serial Inputs
VBB Output for Single-ended Input Applications
Asynchronous Data Reset (SYNC)
PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V
Open Input Default State
Safety Clamp on Inputs
Parallel Interface Can Support PECL, TTL and CMOS
Pb-Free Packages are Available
Parallel to Serial Conversion
供給状況 & サンプル
Compliance: Pb-free Halide free
内容: 3.3 V / 5.0 V ECL 8-Bit Differential Parallel to Serial Converter
外形 タイプ: LQFP-32
外形 Case Outline:
梱包形態 タイプ: JTRAY
梱包形態 数量: 250
Market Leadtime (weeks):13 to 16
VCC Typ (V):
fdr Typ (Gb/sec):
tpd Typ (ns):
tsu Min (ns):
th Min (ns):
tJitter Typ (ps):
tR & tF Max (ps):