FXL6408: Fully Configurable 8-Bit I2C-Controlled GPIO Expander
内容: The FXL6408 is an 8-bit I2C-controlled ...
The FXL6408 is an 8-bit I2C-controlled GPIO expander. When configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the /INT pin. The input default values can be programmed independently, allowing customized input detection. All inputs can be configured with pull-up or pull-down resistors to pre-bias the inputs in open-drain or non-driven applications. When configured in Output Mode, the GPIO pins are capable of delivering 6 mA output drive according to the I2C register set. The FXL6408 is designed to allow voltage translation from levels as low as 1.65 V and up to 4.0 V. The FXL6408 features an active LOW RESET input as well as Power-On Reset (POR) circuit and I2C software reset options.
4X Expansion of Connected Processor I/O Ports
Fully Integrated I2C Slave
8 Independently Configurable I/O Ports
Low-Power Quiescent Current: 1.5 µA
Voltage Translation Capable from 1.65 V I2C Port Up to 4.0 V GPIO Pins
Selectable Device Address
6 mA Output Drive
Interrupt Pin to Alert Processor of Status Changes
This product is general usage and suitable for many different applications.
供給状況 & サンプル
Compliance: Pb-free Halide free
内容: Fully Configurable 8-Bit I2C-Controlled GPIO Expander
外形 タイプ: UQFN-16
外形 Case Outline: 523BF
梱包形態 タイプ: REEL
梱包形態 数量: 5000
Market Leadtime (weeks):Contact Factory
8 Slave ID Addresses
VCC Min (V):
VCC Max (V):
IO Min (mA):