FSBB20CH120DF: Intelligent Power Module (IPM), Motion Control
内容: FSBB20CH120DF is an advanced power module for moti...
FSBB20CH120DF is an advanced power module for motion control, providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logiclevel gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
UL Certified No. E209204 (UL1557)
1200 V - 20 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection
Low-Loss, Short-Circuit Rated IGBTs
Very Low Thermal Resistance Using AlN DBC Substrate
Dedicated Vs Pins Simplify PCB Layout
Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
Single-Grounded Power Supply
LVIC Temperature-Sensing Built-In for Temperature Monitoring
Isolation Rating: 2500 Vrms / 1 min.
供給状況 & サンプル
Compliance: Pb-free Halide free
内容: Intelligent Power Module (IPM), Motion Control
外形 タイプ: DIP-027
外形 Case Outline: MODFJ
梱包形態 タイプ: TUBE
梱包形態 数量: 60
SPM® 3 Series
Rated Voltage Min (V):
IO @ 25 °C Min (A):
VCE(sat) @ 25 °C Typ (V):
3 emitter pins