CAT4238: LED Driver, Boost Converter, High Efficiency
内容: The CAT4238 is a DC-DC step-up converter that deli...
The CAT4238 is a DC-DC step-up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency of 1 MHz allows the device to be used with small value external ceramic capacitors and inductor. LEDs connected in series are driven with a regulated current set by the external resistor R1. LED currents up to 40 mA can be supported over a wide range of input supply voltages up to 5.5 V, making the device ideal for battery-powered applications. The CAT4238 high-voltage output stage is perfect for driving mid-size and large panel displays containing up to ten white LEDs in series.
LED dimming can be done by using a DC voltage, a logic signal, or a pulse width modulation (PWM) signal. The shutdown input pin allows the device to be placed in power-down mode with 'zero' quiescent current.
In addition to thermal protection and overload current limiting, the device also enters a very low power operating mode during 'Open LED' fault conditions.
Drives High Voltage LED strings (38 V)
Up to 87% Efficiency
Low Quiescent Ground Current 0.6 mA
Adjustable Output Current
1 MHz Fixed Frequency Low noise Operation
Soft start “in-rush” current limiting
Shutdown current less than 1 µA
Open LED Overvoltage Protection
Automatic Shutdown at 1.9 V (UVLO)
Thermal overload protection
Mid-size and Large Panel Displays
LED Drive in battery Powered Devices
GPS Navigation Systems
Portable Gaming Systems
Digital Still Cameras
供給状況 & サンプル
Compliance: Pb-free Halide free
内容: LED Driver, Boost Converter, High Efficiency
外形 タイプ: TSOT-23-5
外形 Case Outline: 419AE
梱包形態 タイプ: REEL
梱包形態 数量: 3000
Market Leadtime (weeks):Contact Factory
VIN Min (V):
VIN Max (V):
VO Max (V):
IO Max (mA):
fSW Typ (kHz):