CAT4139: White LED Driver, High Current Boost, 22 V
内容: The CAT4139 is a DC/DC step-up converter that deli...
The CAT4139 is a DC/DC step-up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency of 1MHz allows the device to be used with small value external ceramic capacitors and inductor. LEDs connected in series are driven with a regulated current set by the external resistor R1. The CAT4139 is ideal for driving parallel strings of up to five white LEDs in series or up to 22 V.
LED dimming can be done by using a DC voltage, a logic signal, or a pulse width modulation (PWM) signal. The shutdown input pin allows the device to be placed in power-down mode with 'zero' quiescent current.
In addition to thermal protection and overload current limiting, the device also enters a very low power operating mode during 'Open LED' fault conditions.
Switch Current Limit 750 mA
Drives LED strings up to 22 V
Up to 87% Efficiency
Low Quiescent Ground Current 0.6 mA
1 MHz Fixed Frequency Low noise Operation
Soft start “in-rush” current limiting
Shutdown current less than 1 µA
Open LED Overvoltage Protection
Automatic Shutdown at 1.9 V (UVLO)
Thermal overload protection
LED Drive for Parallel Strings
GPS Navigation Systems
Portable Media Players
供給状況 & サンプル
Compliance: Pb-free Halide free
内容: White LED Driver, High Current Boost, 22 V
外形 タイプ: TSOT-23-5
外形 Case Outline: 419AE
梱包形態 タイプ: REEL
梱包形態 数量: 3000
Market Leadtime (weeks):8 to 12
VIN Min (V):
VIN Max (V):
VO Max (V):
IO Max (mA):
fSW Typ (kHz):